PU Foam Cleaner
Ingredients：dichloromethane, propane, butane
Special cleaner used for cleaning polyurethane foam.Its main application is to clean foamguns and other surfaces.It can only clean uncured polyurethane foam.
Instruction
1. After using the pu foam , remove the spray gun, and immediately fix the cleaner to
the spray gun;
2. Open the flow control valve at the rear of the spray gun and pull the trigger to fully clean
the inside of the spray gun;
3. After the spray gun is cleaned, close the flow control valve and remove the spray gun;
4. Install the equipped spray head to clean the wet pu foam on the outside of the spray gun
and the valve
User guidance
1. Keep away from heat, sparks, flames and static electricity;
2. Turn off sources of ignition (pilot light etc.).
3. Use in well-ventilated areas.
4. Keep out of the reach of children.
5. Do not expose it to direct sunlight or any places where temperature is over 50℃ .
6. Do not burn or pierce, even after use because there is pressure inside of the bottle..
7. In case of eye contact, flush with water and get immediate medical attention
